Pericoli

Havalandırma Sistemleri

Discover our ventilation systems

Ventilation and cooling systems in the poultry sector are not only recommended, but they are even essential for the well-being and survival of the flock. For proper air conditioning within poultry farms, it is essential to install ventilation, cooling and heating systems that ensure all the necessary requirements for animal welfare.

For chickens and hens, dispersing excess heat is a very difficult process. Due to their plumage, most of the excess temperature is expelled through breathing.In this way, these animals spread large quantities of carbon dioxide and ammonia through their breathing.

Thus, it is clear that ventilation and cooling systems help maintain a correct temperature inside poultry environments and carry out frequent air changes, which are essential for optimal farm management. Starting from the design phase of the poultry shed, many structural and environmental factors must be taken into account in order to properly start the breeding of birds.

Normally the chickens reach the maximum productivity peak and a general situation of well-being when the temperature settles between 11 and 26 ° C. With the progressive increase of the heat in the environment and of the relative humidity beyond the thermoneutral zone of the bird, its heat dispersion capacity drastically decreases, undergoing the so-called “heat stress“.

The direct consequences of birds exposed to excessive heat can be:

  • greater water consumption;
  • decreased food intake;
  • slow rate of deposition;
  • lower egg quality;
  • lower fertility of the male chicken;
  • increased death rate.

Ventilation and cooling systems are the most effective solutions for cooling the poultry house during the hot period. The airflow allows to eliminate excessive heat from the animal, producing a sensation of coolness (also called “windchill effect“), but also to ensure the right supply of oxygen and eliminate metabolic substances such as moisture, ammonia and carbon dioxide.

EOS

Ventilation

- Available in 42” and 53”

- Wall-housing in galvanized steel

- Patented shutter opening system – “flap system”

- Designed to minimize maintenance costs

EWS

Ventilation

- Available in 42” and 53”

- Wall-housing in galvanized steel or stainless steel “Aeternum” version (only 53”)

- Patented shutter opening system – “omega system”

- Designed to minimize maintenance costs

EWD

Ventilation

EWD – Direct-driven exhaust fan

 

- Available in 26”, 31” and 37”

- Wall-housing in galvanized steel or stainless steel “Aeternum” (only 31”)

- Patented shutter opening system

- Aerodynamic impeller in aluminum alloy “Peraluman”

EOC

Ventilation

EOC – Cone fan

 

- Available in 53” and 56″

- Wall-housing in galvanized steel

- Shutter opening system by gravity – shutter blades in aluminum

- Adjustable Belt tensioner (option)

EOR

Ventilation

EOR – Belt-driven air circulation fan

 

- Available in 42” and 53”

- Wall-housing in galvanized steel or stainless steel “Aeternum” (only 53”)

- Impeller available with 3 or 6 blades

- Designed to minimize maintenance costs

ACF

Ventilation

ACF – Cylindrical air circulation fan

 

- Available in 18”, 21” and 26”

- Wall-housing in galvanized steel or stainless steel (only 21”)

- Double safety nets

- Aerodynamic impeller in aluminum alloy “Peraluman”

ACF SB

Ventilation

ACF SB – Cylindrical air circulation fan

 

  • Available in 21” and 26”
  • Wall-housing in galvanized steel
  • 4 practical eyelets for easy suspension
  • Aerodynamic impeller in aluminum alloy “Peraluman”

FJT

Ventilation

FJT – Direct-driven air destratifier

 

  • Available in 31″
  • Wall-housing in galvanized steel
  • 6 blades impeller in aluminum
  • Ideal for installation of polyethylene duct

COMBITERM

Heating

combiTERM – Indirect air heater

 

  • Airheater capacities from 35 to 240 kW
  • Adaptable for GPL, diesel, and natural gas
  • Many practical accessories
  • Versatile to satisfy many different installations

F-OTB

Heating

F-OTB – Direct-driven jet fan

 

  • Airheater capacities from 52 to 116 kW
  • Ductable air outlet
  • High quality copper and aluminum batteries for maximum efficiency in energy exchange
  • Versatile for satisfy many different installations

AGRITERM

Heating

agriTERM – Direct gas-fired air heater

The air heater AGRITERM is developed for livestock buildings. The direct flame guarantees maximum efficiency. it can run both LPG or natural gas.

  • Airheater capacities from 16 to 100 kW
  • Adaptable for GPL and natural gas
  • Stainless steel body for maximum corrosion resistance
  • Low emissions of Nox and CO in the atmosphere

EASYTERM

Heating

easyTERM – Direct-fired gas air heater

 

  • Airheater capacity 70 kW only
  • Adaptable for GPL and natural gas
  • High-tech body for maximum corrosion resistance
  • High energy efficiency

PERICOOL

Cooling

PERIcool – Cellulose evaporative cooling pad

 

  • Available in wide range of height, thickness and angles
  • Treated with special odourless resin
  • Quality control on each pad
  • Packaging designed for easy handling

MDFX

Cooling

MDFX – Metal frame system for evaporative cooling pads with tank-gutter

 

  • Standard configuration up to 30m (thickness 100mm) and 24m (thickness 150mm) standard height 1000-1500-1800-2000mm. Other length and height available on demand.
  • Easy installation in practical assembly kit
  • Gutter frame in stainless steel
  • Designed to minimize the time required for ordinary maintenance and cleaning

MFP

Cooling

MFP – Gutter Frame System

 

  • Available in 0.6 m multiple modules
  • Supplied in a practical assembly kit
  • Gutter frame in coated galvanized steel “Pluvimag”
  • Designed to minimize the time required for ordinary maintenance and cleaning

PERICOOLER

Cooling

PERIcooler – Evaporative cooler

 

  • Water tank capacity 335 l only
  • Frame in hi-tech steel
  • Available also in unassembled version
  • Practical accessories for fixed or mobile installation

RWA

Cooling

RWA – Water Optimazer

 

  • Atomizing capacity from 3.5 to 55 l/h
  • Manufactured in plastic material
  • Water flow can be regulated according to your needs
  • Installation on a circulation fan or stand alone

G-EOC

Gline

G EOC – Direct-drive cone fan with brushless motor

 

  • Configurable brushless motor
  • Removable motorised shutter
  • Protection grid on the air outlet side
  • Safety net on air intake side

G-EOR

Gline

G EOR – Direct-drive circulation fan with brushless motor

 

  • Configurable brushless motor
  • 4 secure suspension eyes
  • 6 blades propeller in Peraluman
  • Hinged opening guards

 

SOB

Accessories

SOB – Motorized Air Inlet

 

  • Available for models 26”, 31”, 42” and 53”
  • Wall-housing and shutters in galvanized steel (on request available also stainless steel “Aeternum” version for MOQ)
  • Robust servo-drive, particularly suitable for the most aggressive applications
  • Unassembled version available for self-installation

G-EOS

Gline

GEOS – Drirect-driven exhaust fan with brushless motor

 

  • Configurable brushless motor
  • Removable motorised shutter
  • 6 blades propeller in Peraluman
  • Practical fixing strip for wall installation

RL

Accessories

RL – Gravitational Air Intlet

 

  • Available for models 31”, 42” and 53”
  • Wall-housing in galvanized steel
  • Shutters in hi-tech aluminum
  • Unassembled version available for self-installation

LTP

Accessories

LTP – Light Traps for Fan on Air Inlet

 

Our LTP represents the right compromise between high darkening capacity and low pressure drop but there are 5 other features you need to know. Take 90 seconds to watch this video and discover them all!

 

  • Available for models 26”, 31”, 37”, 42” and 53”
  • Wall-housing in galvanized steel, double wavews in special PVC
  • Effective light reduction
  • Supplied in unassembled version for an easy self-installation

PERIDARK

Accessories

PERIdark – Light Filter for Wide Surfaces or Cooling Walls

 

  • Available thicknesses 130 and 260mm
  • Realized in UV-ray resistant PVC
  • Model 130 mm for indirect sun exposure
  • Model 260 mm for direct sun exposure

PERICURTAIN

Accessories

PERIcurtain – Curtain system for livestock buildings

 

  • Available heights 190 and 290 cm
  • Manufactured in UV- stabilized polyethylene
  • Available in dark or transparent version
  • Practical accessories for self-installation

ACF 21P

Ventilation

ACF 21p- Cylindrical air circulation fan made of plastic

 

  • Fan body made of plastic with a high concentration of fiberglass
  • Special impeller shape design made of plastic with a high concentration of fiberglass
  • Three-phase to single-phase conversion with a simple kit
  • Several hanging options
  • Packaging specially designed to reduce logistics costs
  • BESSlab certified
  • Reduced weight

PLUSCOOL

Cooling

PLAScool HE Dark- PVC evaporative cooling pad

 

  • Plastic panel with high cooling efficiency
  • Available in the height range 1200, 1500, 1800, 2000 and thickness 150
  • Possibility of sending knocked-down “KD” in order to save on freight costs
  • High darkening capacity